HiHope RZ/G2M

Category: .

HiHope RZ/G2M

$850.00

The HiHope RZ/G2M microprocessor (MPU) features a 64-bit multi-core architecture with advanced graphics capabilities and a high-bandwidth memory interface to support systems with enhanced human-machine interfaces.

High-performance, high-reliability MPU
with next-generation human-machine interface in advanced graphics and building automation

Parameter details

Configuration
parameter
Processor Series
RZ/G Series
SoC
RZ / G2M
CPU
2 ARM Cortex-A57 @1.5GHz + 4ARM Cortex-A53@1.3GHz
GPU
Imagination Technologies PowerVR Series 6XT GX6250@700 MHz
Memory
4GB LPDDR4 SDRAM
Storage
64GB UFS flash storage, Micro SD card slot, PCIE Gen3 on M.2 M Key connector
Wireless
WiFi(2.4 -and 5-GHz dual band with two antennas),Bluetooth 4.1
USB
1 x USB 3.0 type A(Host/Function), 1 x USB 2.0 type A(Host), 1 x USB 2.0 Micro(Host/Function/OTG),
Display
1 x HDMI1.4 (Type A -full), HDMI out up to FHD 1080P, 1 x 4L - MIPI DSI
Video
MPEG2@80Mbps, MPEG4@50Mbps, H264@240Mbps, H265@160Mpbs, VP8@100Mbps, VP9@120Mbps
Audio
HDMI  output
Camera
1 x 2-lane MIPI CSI, 1 x 4-lane MIPI CSI
Expansion Interface
40 pin low speed  expansion  connector:+1.8V, +5V, DC power, GND, 2UART, 2I2C,SPI,I2S,12*GPIO
60 pin high speed expansion  connector:4L-MIPI DSI, I2C x2, SPI(48M),USB 2.0,
2L +4LMIPI CSI
CAN
Implements CAN V2.0B at 1Mb/s: 0-8 byter length in the data field; Standard  and
extended data and remote  frames
Receive  buffers, masks and filters:Two receive buffers with prioritized message
storage; Six 29-bit filters; Two 29-bit  masks
Ethernet
gigabit ethernet
LED
1 x WiFi activity LED, 1 x BT activity LED, 4 x User LEDs
Button
Power Button : Button Power on /off & Reset the system
Power Source
Recommend a 12V@5A adaptor  with  a DC pulg  which  has  a 4.75mm outer  diameter  and 1.7mm center pin with standard  center -positive(EIAJ-3 Compliant)
OS Support
AOSP/LINUX
Appearance characteristic
100mm x 85mm

Reviews

There are no reviews yet.

Add a review